R&S SMA100A - LF Generator Level

AF2040 emulation mode
1GP71_0E 28 Rohde & Schwarz
Status Command / Function / Remark / Limitation
LFGF:INC value
Set LF generator frequency step.
Value:
num [HZ | KHZ | MHZ |GHZ]
Default:
1.0 KHZ
LFGF:UP
Set LF generator frequency one step up.
LFGF:DN
Set LF generator frequency one step down.
LFGF:RETN
Return to original setting.
LFGF:XFER
Treat current setting to be the new original setting.
LFGF:SIN
Set LF generator waveform to sine.
LFGF:TRI
Set LF generator waveform to triangle.
LFGF:SQU
Set LF generator waveform to square.
LFGF?
Query informations on the LF generator frequency setting.
Table 23: LF Generator Frequency
• LF Generator Level
Status Command / Function / Remark / Limitation
LFGL[:VALUE] value
Set LF generator level.
Value:
num [V | MV | UV | DBMV]
Default:
100.0 UV
LFGL:INC value
Set LF generator level step.
Value:
num [DB]
Default:
1.0 DB
LFGL:UP
Set LF generator level one step up.