R&S SMA100A - System Subsystem

HP8648 emulation mode
1GP71_0E 140 Rohde & Schwarz
Status Command / Function / Remark / Limitation
STATus: QUEStionalbe:CONDition?
Query the condition bits of the questionable status register.
STATus: QUEStionalbe:ENABle value
Set / Query the enable bits of the questionable status register.
STATus:QUEStionalbe:POWer[:EVENt]?
Query the event bits of the power questionable status register.
STATus: QUEStionalbe:POWer:CONDition?
Query the condition bits of the power questionable status register.
STATus: QUEStionalbe:POWer:ENABle value
Set / Query the enable bits of the power questionable status register.
STATus:QUEStionalbe:MODulation[:EVENt]?
Query the event bits of the modulation questionable status register.
STATus: QUEStionalbe:MODulation:CONDition?
Query the condition bits of the modulation questionable status register.
STATus: QUEStionalbe:MODulation:ENABle value
Set / Query the enable bits of the modulation questionable status register.
STATus:QUEStionalbe:CALibration[:EVENt]?
Query the event bits of the calibration questionable status register.
STATus: QUEStionalbe:CALibration:CONDition?
Query the condition bits of the calibration questionable status register.
STATus: QUEStionalbe: CALibration:ENABle value
Set / Query the enable bits of the calibration questionable status register.
Table 138: STATUS subsystem
• SYSTem Subsystem
Status Command / Function / Remark / Limitation
SYSTem:ERRor?
Query and clear the oldest error.
Remark:
The original error codes and error descritions of the SM* are returned. No translation
to the HP8648 error codes and descriptions are done.
SYSTem:LANGuage value
Select / Query the remote-control language.
Value:
“SCPI” | “COMP” | “EXIT”
Remark:
On select, only “EXIT” is supported (to return to the instruments native SCPI-
language).
On query, always “SCPI” is returned.
“COMP” language is supported via “HP8657” emulation mode.