R&S SMA100A - Memory Store

AF2040 emulation mode
1GP71_0E 29 Rohde & Schwarz
Status Command / Function / Remark / Limitation
LFGL:DN
Set LF generator level one step down.
LFGL:RETN
Return to original setting.
LFGL:XFER
Treat current setting to be the new original setting.
LFGL:UNITS value
Select default LF generator level unit.
Value:
[DMB | DBV | DBMV | V | MV | UV]
Default:
V
Remark:
DBM, DBV are not supported.
LFGL?
Query informations on the LF generator level setting.
Table 24: LF Generator Level
• Memory Store
Status Command / Function / Remark / Limitation
STO:FULL value
Full store.
Value:
0 … 49
Remark:
Storage registers are not persisent and lost on power down and reset operations.
STO:PART value
Partial store.
Value:
0 … 49
Remark:
Storage registers are not persisent and lost on power down and reset operations.
STO:CFRQ value
Carrier frequency store.
Value:
0 … 99
Remark:
Storage registers are not persisent and lost on power down and reset operations.