R&S SMA100A - Trigger Subsystem; Tsweep Subsystem; UNIT Subsystem

HP8360 emulation mode
1GP71_0E 95 Rohde & Schwarz
Status Command / Function / Remark / Limitation
SYSTem:LANGuage value
Set / Query the programming language.
Value:
“SCPI” | “CIIL” | “COMPatilbe”
Remark:
“SCPI” returns to the native SM* SCPI language
“CIIL”, “COMPatible” are not supported
SYSTem:MMHead:SELect value
SYSTem:MMHead:SELect:AUTO value
SYSTem:PRESet[:EXEC]
SYSTem:PRESet::SAVE
SYSTem:PRESet::TYPE value
SYSTem:SECurity:COUNt value
SYSTem:SECurity[:STATe] value
SYSTem:VERSion?
Query the SCPI version number that the instruments supports.
Table 87: System subsystem
• TRIGger Subsystem
Status Command / Function / Remark / Limitation
TRIGger[:IMMediate]
TRIGger:ODELay value
TRIGger:SOURce value
Table 88: Trigger subsystem
• TSWeep Subsystem
Status Command / Function / Remark / Limitation
TSWeep
Table 89: TSweep subsystem
• UNIT Subsystem
Status Command / Function / Remark / Limitation
UNIT:AM value
UNIT:POWer value
Table 90: Unit subsystem