R&S SMA100A - RF Level

AF2040 emulation mode
1GP71_0E 17 Rohde & Schwarz
Status Command / Function / Remark / Limitation
CFRQ[:VALUE] value
Set carrier frequency.
Value:
num [HZ | KHZ | MHZ | GHZ]
Default:
1.35 GHZ
CFRQ:INC value
Set carrier frequency step.
Value:
num [HZ | KHZ | MHZ | GHZ]
Default:
1.0 KHZ
CFRQ:UP
Set carrier frequency one step up.
CFRQ:DN
Set carrier frequency one step down.
CFRQ:RETN
Return to original setting.
CFRQ:XFER
Treat current setting to be the new original setting.
CFRQ:PHASE value
Adjust phase of carrier.
Value:
-255 … 255
Default:
0
CFRQ?
Query informations on carrier frequency setting.
Table 10: Carrier frequency
• RF Level
Status Command / Function / Remark / Limitation
RFLV[:VALUE] value
Set RF output level.
Value:
num [DBM | DBV | DVMV | DBUV | V | MV | UV]
Default:
-144.0 DBM