R&S SMA100A - Frequency Hopping; Miscellaneous

AF2040 emulation mode
1GP71_0E 35 Rohde & Schwarz
Status Command / Function / Remark / Limitation
SWEEP:RESET
Reset sweep to start value.
SWEEP:XFER
Transfer paused value to main parameter.
SWEEP:UP
Go up one sweep step while paused.
SWEEP:DN
Go down one sweep step while paused.
Table 30: Sweep Control
• Frequency hopping
Status Command / Function / Remark / Limitation
HOPSEQ value.
HOPSEQ?
Table 31: Frequency hopping
• Miscellaneous
Status Command / Function / Remark / Limitation
RPPR
Reset reverse power protection trip.
FSTD value
Select internal or external frequency standard.
Value:
INT0 | INT1 | INT5 | INT10 | EXT1 | EXT5 | EXT10
Default:
EXT10
Remark:
Only INT10, EXT5 and EXT10 are supported.
FSTD?
Query informations on frequency standard.
BLANK value
BACKL:ON
BACKL:OFF
TIME?
Query informations on current time.
DATE?
Query informations on current date.