R&S SMA100A - Status Reporting

HP8648 emulation mode
1GP71_0E 142 Rohde & Schwarz
REFERENCE = 0.0 HZ
REFERENCE STATE = OFF
OUTPUT STATE = OFF
PM DEVIATION = 1.0 RAD
STATE = OFF
SOURCE = INTERNAL
COUPLING = DC
INTERAL FREQUENCY = 1.0 KHZ
SHAPE = SINE
POWER LEVEL = -136.0 DBM
ATTENUATOR AUTO = ON
REFERENCE = 0.0 DBM
REFERENCE STATE = OFF
PULM STATE = OFF
STATUS -
SYSTEM LANGUAGE = “SCPI”
Table 140: Factory default settings
Status reporting
Status reporting is not supported so far.