R&S SMA100A - Pulse Subsystem; Roscillator Subsystem; Status Subsystem

HP8360 emulation mode
1GP71_0E 91 Rohde & Schwarz
Table 82: Pulm subsystem
• PULSe Subsystem
Status Command / Function / Remark / Limitation
PULSe:FREQuency value
PULSe:PERiod value
PULSe:WIDTh value
Table 83: Pulse subsystem
• ROSCillator Subsystem
Status Command / Function / Remark / Limitation
ROSCillator:SOURce value
Set / Query the source of the reference oscillator
Value:
INTernal | EXTernal | NONE
Default:
--
Remark:
EXTernal, NONE are not supported.
ROSCillator:SOURce:AUTO value
Table 84: ROscillator subsystem
• STATus Subsystem
Status Command / Function / Remark / Limitation
STATus:OPERation:CONDition?
Query the condition bits of the operation status register.
STATus:OPERation:ENABle value
Set / Query the enable bits of the operation status register.
Value:
0 … 32757
Default:
0
STATus:OPERation[:EVENt]?
Query the event bits of the operation status register.
STATus:OPERation:NTRansition value
Set / Query the negative transition filter bits of the operation status register.
Value:
0 … 32757
Default:
0