R&S SMA100A - Common

HP8360 emulation mode
1GP71_0E 79 Rohde & Schwarz
• Common
Status Command / Function / Remark / Limitation
*CLS
Clear the status byte, the data questionable event register, the standard event
status register, the operation status register …
*ESE value
Set / Query the bits of the event status enable register.
Value:
0 … 255
*ESR?
Query the bits of the event status register.
*IDN?
Query the ID string.
*LRN?
Query the long string device specific character set.
*OPC
*OPC?
Wait / Query for the complete execution of all programming commands.
*OPT?
Query the device options.
Value:
---
Remark:
HP8360 options are not returned.
SM* options returned.
*RCL value
Recall an instrument setup.
Value:
0 … 9
*RST
Reset the instrument to the default state.
Remark:
SM*’s default state is applied and activated.
*SAV value
Save an instrument setup.
Value:
0 … 9
*SRE value
Set / Query the bits of the service request enable register.
Value:
0 … 191
*STB?
Query the bits of the status byte.