R&S SMA100A - Memory Recall

AF2040 emulation mode
1GP71_0E 30 Rohde & Schwarz
Status Command / Function / Remark / Limitation
STO:SEQT value
Sequenital tones store.
Value:
0 … 19
Remark:
Storage registers are not persisent and lost on power down and reset operations.
STO:SWEEP value
Sweep store.
Value:
0 … 19
Remark:
Storage registers are not persisent and lost on power down and reset operations.
Table 25: Memory Store
• Memory Recall
Status Command / Function / Remark / Limitation
RCL:FULL value
Full recall.
Value:
0 … 49
Remark:
Storage registers are not persisent and lost on power down and reset operations.
RCL:FXCF value
Full recall without carrier frequency.
Value:
0 … 49
Remark:
Storage registers are not persisent and lost on power down and reset operations.
RCL:PART value
Partial recall.
Value:
0 … 49
Remark:
Storage registers are not persisent and lost on power down and reset operations.
RCL:PXCF value
Partial recall without carrier frequency.
Value:
0 … 49
Remark:
Storage registers are not persisent and lost on power down and reset operations.