R&S SMA100A - Modulation

HP8662 emulation mode
1GP71_0E 152 Rohde & Schwarz
AP value
Set output amplitude and turn output on.
Value:
Pmin … Pmax in {+D | -D | DM | MV | UV} | UP | DN
Default:
-30 DM
A0
Alias for AO.
AO
Turn output off.
Table 151: Amplitude commands
• Modulation
Status Command / Function / Remark / Limitation
AM value
Set rf carrier modulation depth and turn modulation on.
Value:
0.0 … 95.0 in {PC} | UP | DN
Default:
30 PC
BP
Set bi-phase modulation on.
F0
Alias for FO.
FO
Turn actual selected modulation off.
FM value
Set rf carrier modulation deviation and turn modulation on.
Value:
0.0 … 100.0 {HZ | KZ}
Default:
10.0 KZ
MF value
Set modulation signals’s frequency.
Value:
0.0 … 100.0 {HZ | KZ}
Default:
?
M0
Alias for MO
MO