R&S SMA100A - Data; Units

HP8662 emulation mode
1GP71_0E 153 Rohde & Schwarz
Set modulation off.
M1
Select internal 400 Hz signal as modulation source.
M2
Select internal 1000 Hz signal as modulation source.
M3
Select external, dc coupled modulation source.
M4
Select external, ac coupled modulation source.
PL
Set pulse modulation.
PM value
Set rf carrier modulation deviation and turn modulation on.
Value:
0.0 … 360.0 DG
Default:
0.0 DG
Table 152: Modulation commands
• Data
Status Command / Function / Remark / Limitation
‘0’ … ‘9’
Numerals 0-9
‘.’
Decimalpoint
BS
Backspace
Table 153: Data
• Units
Status Command / Function / Remark / Limitation
DB
Power unit DB
DG
Phase unit Deg
DM
Power unit dBm
+D
Power unit + dBm
-D
Power unit - dBm