R&S SMA100A - Common

HP8373 emulation mode
1GP71_0E 98 Rohde & Schwarz
• Common
Status Command / Function / Remark / Limitation
*CLS
Clear the operation event register, the questionable event register and the standard
status register.
*DMC value, value
*EMC value
*ESE value
Set / Query the bits of the extended status enable register.
Value:
0 … 255
*ESR?
Query the bits of the extended status register.
*GMC? value
*IDN?
Query the ID string.
*LMC?
*LRN?
Query the current state of the instrument.
*OPC
*OPC?
Wait / Query for the complete execution of all programming commands.
*OPT?
Query the device options.
Value:
1E1, 1E2, 1E5, :1E8, 1E9, 800
Remark:
HP8373 options are not returned.
SM* options returned.
*PMC
*RMC value
*PSC value
*RCL value
Recall an instrument setup.
Value:
0 … 9
*RST
Reset the instrument to the default state.
Remark:
SM*’s default state is applied and activated.