R&S SMA100A - Frequency Subsystem; Output Subsystem; PM Subsystem

HP8648 emulation mode
1GP71_0E 137 Rohde & Schwarz
• FREQuency Subsystem
Status Command / Function / Remark / Limitation
[:SOURce:]FREQuency[:CW | :FIXed] value
Set / Query the RF output frequency.
Value:
Fmin - Fmax
Default:
100 MHZ
[:SOURce:]FREQuency:REFerence value
Set / Query the frequency reference.
Value:
Fmin - Fmax
Default:
0 MHZ
[:SOURce:]FREQuency:REFerence:STATe value
Selects / Query the (activation) state of the frequency reference.
Value:
ON | OFF | 1 | 0
Default:
OFF
Table 133: FREQUENCY subsystem
• OUTPut Subsystem
Status Command / Function / Remark / Limitation
OUTPut[:STATe] value
Set / Query the state of the RF output.
Value:
ON | OFF | 1 | 0
Default:
OFF
Table 134: OUTPUT subsystem
• PM Subsystem
Status Command / Function / Remark / Limitation
[SOURce:]PM[:DEViation] value
Set /Query the modulation deviation.
Set /Query the modulation deviation.
Value:
0 RAD … tbd
Default:
1 RAD