R&S SMA100A - Page 162

HP8662 emulation mode
1GP71_0E 162 Rohde & Schwarz
SP31
Enable amplitude reference feature (reference = 0.0 dB).
SP32
Enable amplitude reference feature (reference = 1.0 mV).
SP40
Disables modulation sweep mode.
SP41
Enables modulation sweep mode.
SP50
Disable rear panel AUX connector for FM.
SP51
Enable rear panel AUX connector for FM.
SP60
Disable PSK mode
SP61
Enable PSK increment mode
SP62
Enable PSK toggle mode
SP70
Set external input impedance to 50 ohms.
SP71
Set external input impedance to 600 ohms.
SP80
Turns off special functions 10, 20, 30, 40, 50, 60, 70.
SP81
Convert amplitude from [V] to [DBM]
SP82
Recalls and displays GPIB settings.
SP83
Perform ROM check
SP84
Perform RAM check
SP85
Disable amplitude correction in all modes.
SP86
Disable amplitude correction in sweep modes.
SP87
Enable amplitude correction in sweep modes.
SP88
Enable auto sequence mode
SP89
Service request by operator.