R&S SMA100A - Page 61

HP8340 emulation mode
1GP71_0E 61 Rohde & Schwarz
Remark:
There is no signal output on auxiliary i/o.
M5[value]
Turn on marker 5, optionally set marker frequency.
Value:
freqmin … freqmax HZ | KZ | MZ | GZ
Default:
0.5 * (freqmin + freqmax)
Remark:
There is no signal output on auxiliary i/o.
M1M0
Turn off marker 1.
M1MO
Turn off marker 1.
M2M0
Turn off marker 2.
M2MO
Turn off marker 2.
M3M0
Turn off marker 3.
M3MO
Turn off marker 3.
M4M0
Turn off marker 4.
M4MO
Turn off marker 4.
M5M0
Turn off marker 5.
M5MO
Turn off marker 5.
SHM0
Turn off all markers.
SHMO
Turn off all markers.
MD1<value>
Turn on delta marker.
Value:
M1M2 | M1M3 | M1M4 | M1M5 | M2M3 | M2M4 | M2M5 | M3M4 | M3M5 | M4M5
Default:
-
Remark:
There is no signal output on auxiliary i/o.