R&S SMA100A - Page 89

HP8360 emulation mode
1GP71_0E 89 Rohde & Schwarz
Status Command / Function / Remark / Limitation
POWer[:LEVel] value
Set / Query the rf output level.
Value:
num [tbd] | UP | DOWN | MAXimum | MINimum
Pmin dBm _ num _ Pmax dBm
Default:
0.0 dBm
Remark:
UP, DOWN, MAXimum, MINimum are not supported.
POWer:MODE value
Set / Query the rf power operation mode.
Value:
FIXed | SWEep
Default:
CW
POWer:OFFSet value
POWer:OFFSet:STATe value
POWer:RANGe value
POWer:SEARch value
POWer:SLOPe value
POWer:SLOPe:STATe value
POWer:SPAN value
POWer:STARt value
Set / Query the rf start output level (in sweep mode).
Value:
num [tbd] | UP | DOWN | MAXimum | MINimum
Pmin dBm _ num _ Pmax dBm
Default:
0.0 dBm
Remark:
UP, DOWN, MAXimum, MINimum are not supported.
POWer:STATe value
Set / Query the (activation) state of the rf output
Value:
ON | OFF | 1 | 0
Default:
OFF
POWer:STEP:AUTO value