Renesas H8 Series User Manual

114
Notes: 1. When [Time Out] is selected in the Start Point To End Point Measurement mode, the execution time
will not be measured correctly.
2. When [Time Out] and [Count] are selected, satisfaction of either of these options stops execution of
the user program (performance break).
3. Only channel 1 can be used for [Time Out] and [Count]. Use other channels if you do not want to
select [Time Out] or [Count] in the Start Point To End Point Measurement mode.

Renesas H8 Series Specifications

General

Brand	Renesas
Model	H8 Series
Category	Computer Hardware
Language	English