Renesas H8 Series User Manual

162
(5) Then, select Area from the [Item] combo box and enter RAM in the [Start] edit box. After that, click the
[Add] button; the new condition is now added to the “R/W=WR” display in the [Condition] column of the
[Result] list box, so that it now shows “R/W=WR & Area=RAM”. This completes setting of the condition.
Figure 6.56 [Statistic] Dialog Box (Condition Added)

Renesas H8 Series Specifications

General

Brand	Renesas
Model	H8 Series
Category	Computer Hardware
Language	English