13
5. The [Welcome!] dialog box is displayed.
Figure 2.12 [Welcome!] Dialog Box
To use a workspace for the tutorial, select the [Browse to another project workspace] radio button and click the
[OK] button.
When the [Open Workspace] dialog box is opened, specify the following directory:
OS installation drive \Workspace\Tutorial\E6000\xxxx
Note: The directory mentioned above cannot be specified depending on the version of the software. In such
cases, specify the following directory instead.
High-performance Embedded Workshop installation destination directory
\Tools\Renesas\DebugComp\Platform\E6000\xxxx\Tutorial
After the directory has been specified, select the following file and click the [Open] button.
Figure 2.13 [Open Workspace] Dialog Box
To Next Page
Loading...
