RL78/F13, F14 CHAPTER 15 SERIAL ARRAY UNIT
R01UH0368EJ0210 Rev.2.10 988
Dec 10, 2015
Figure 15-142 shows the configuration of a port that manipulates reception of LIN.
The wakeup signal transmitted from the master of LIN is received by detecting an edge of an external interrupt (INTP0).
The length of the sync field transmitted from the master can be measured by using the external event capture operation of
the timer array unit 0 to calculate a baud-rate error.
By controlling switch of port input (ISC0/TIS1), the input source of port input (RxD0) for reception can be input to the
external interrupt pin (INTP0) and timer array unit 0.
To Next Page
Loading...
Need help?
General
