Ricoh D025 - Front Cover; Rear Cover

Common Procedures
D372 2 SM
1.1.2 FRONT COVER
Preparation
 Disconnect the finisher.
 Remove the finisher from the side of the machine.
1. Open the stapler door [A].
2. Remove the front cover [B] ( x2)
Release tab [C] after removing the screws, then raise the bottom of the front cover to
remove it.
1.1.3 REAR COVER
Preparation
 Disconnect the finisher.
 Remove the finisher from the side of the machine.
1. Remove the rear cover [A] ( x2)
Release tab [B] after removing the screws, then raise the bottom of the rear cover to
remove it.