Ricoh D025 - Ieee 802.11 A;G, G (Wireless Lan); Installation Procedure

Controller Options
SM 2-101 D023/D025
Installation
2.26.6 IEEE 802.11 A/G, G (WIRELESS LAN)
Installation Procedure
 Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at one time: (IEEE 802.11 a/g, g
(Wireless LAN), IEEE1284, Bluetooth).
1. Remove the slot cover [A] from the board slot ( x 2).
2. Install the wireless LAN board [B] (Knob-screw x 2) into the board slot.
3. Make sure that the machine can recognize the option (see ‘Check All Connections’ at
the end of this section).
4. Peel off the double-sided tapes on the Velcro fasteners [A], and then attach them [A] at
the front left and rear left of the machine.