Image Adjustment
SM 4-5 D023/D025
Replacement
&
Adjustment
SP Code What It Does Adjustment Range
SP6-006-001 Side-to-Side Registration ± 3.0 mm
SP6-006-003 Leading Edge Registration ± 5.0 mm
SP6-006-005 Buckle: Duplex Front ± 3.0 mm
SP6-006-006 Buckle: Duplex Rear ± 2.5 mm
SP6-006-007 Rear Edge Erase (Trailing Edge) ± 10.0 mm
ARDF sub-scan magnification
1. Put the temporary test chart on the ARDF. Then make a copy from one of the feed
stations.
2. Check the magnification ratio. Adjust with SP6-017-001 if necessary.
Standard: ±1.0%
Reduction mode: ±1.0%
Enlargement mode: ±1.0%
To Next Page
Loading...
