Paper Output
D372 40 SM
2.5.2 FEED-OUT
The diagram below shows how the feed-out belt and mobile fence work together to push
the stack to the output tray.
➀
Document stacking has finished and the stack is ready to be output. The output belt
pawls are at their home positions [A]. The mobile fence [B] is at its home position
between the front and rear bottom fences [C].
➁
The mobile fence pushes the stack to the right and stops.
➂
The feed-out belt pawls rapidly swing up and push the stack toward the output tray.
➃
The feed-out belt pawls push the stack onto the output tray. A spring (not shown)
retracts the mobile fence.
To Next Page
Loading...
