Controller Options
SM 2-99 D023/D025
Installation
4. Attach the “Adobe PostScript 3” decal [A] to the front door.
5. Make sure that the machine can recognize the option (see ‘Check All Connections’ at
the end of this section).
2.26.4 FILE FORMAT CONVERTER
Unplug the main machine power cord before you do the following procedure.
1. Remove the slot cover [A] ( x 2).
2. Install the file format converter [B] into slot B and then fasten it with screws.
3. Plug in the machine and turn on the main power switch.
4. Check or set the following SP codes with the values shown below.
To Next Page
Loading...
