Fusing
D023/D025 4-106 SM
12. Fusing belt [A] with rollers (spring x 2, C-ring x 3, bearing x 4, insulating bushing x 2)
13. Fusing belt [A]
When reassembling the fusing unit
When replacing the fusing roller or pressure roller, you have to apply lubricant to the
following places.
Fusing Roller
Apply "Barrierta S552R" to the notch [A] at the front side of the fusing roller.
Apply "Barrierta S552R" to the edge [B] of the step at the rear side of the fusing roller.
To Next Page
Loading...
