Ricoh D025 - Disposal of HDD Units; Hdd; When Installing a New HDD Unit

Electrical Components
D023/D025 4-150 SM
4.14.13 HDD
1. Controller unit (p.4-121 "Controller Unit")
2. Remove the HDD [A] with the bracket ( x 4,  x 2).
3. Remove the HDD from the bracket [A] ( x 4).
When installing a new HDD unit
1. Turn the main power switch on. The disk is automatically formatted.
2. Install the stamp data using "SP5853".
3. Switch the machine off and on to enable the fixed stamps for use.
Disposal of HDD Units
 Never remove an HDD unit from the work site without the consent of the client.
 If the customer has any concerns about the security of any information on the HDD,
the HDD must remain with the customer for disposal or safe keeping.
 The HDD may contain proprietary or classified (Confidential, Secret) information.
Specifically, the HDD contains document server documents and data stored in