Ricoh D025 - Installation Procedure

USB2.0/SD Slot Type A
SM 2-79 D023/D025
Installation
2.22.2 INSTALLATION PROCEDURE
1. Connect the USB cable [B] to the USB slot [A] in the USB2.0/SD Slot as shown above.
2. Attach the ground plate [C] to the bracket of the USB2.0/SD Slot ( x 1: M3x6 blue).
3. Rear cover of the machine ( x 8)
4. Remove the scanner left cover [A] ( x 2).
5. Remove the left frame cover [B] ( x 1).
6. Remove part [A] of the left frame cover with pliers or a similar tool.
7. Reinstall the left frame cover ( x 1).