Ricoh D025 - Postscript 3

D023/D025 2-98 SM
2.26.3 POSTSCRIPT 3
 Unplug the main machine power cord before you do the following procedure.
1. Remove the SD-card slot cover [A] from SD card slots ( x 1).
2. Turn the SD-card label face [B] to the rear of the machine. Then push it slowly into slot
1 until you hear a click.
 Only one SD card slot is available for applications provided on SD cards.
 If the customer wants to use two or more applications from SD cards, the
applications must be moved to a single SD card.
 The PostScript3 application and fonts cannot be moved to another SD card.
However, other applications can be moved onto the PostScript3 SD card.
3. Attach the slot cover [A] ( x 1).