Controller Options
SM 2-115 D023/D025
Installation
2.26.11 VM CARD TYPE I
The VM card application cannot be moved to another SD card. However, other
applications can be moved onto the VM card.
Installation Procedure
1. Switch the machine off.
2. Remove the SD card slot cover [A] ( x1).
3. Turn the SD-card label face [B] to the rear of the machine. Then push it slowly into slot
1 until you hear a click.
4. Reattach the SD card slot cover.
5. Switch the machine on.
6. On the operation panel, remove the bottom blank keytop and replace it with the keytop
provided.
7. Attach the decal to the copier.
To Next Page
Loading...
