One-tray Paper Feed Unit (D387)
SM 2-19 D023/D025
Installation
2.4.2 INSTALLATION PROCEDURE
 Turn off the main switch of the copier and unplug the power cord before you start
the installation procedure.
 You need two or more persons to lift the copier. The copier is highly unstable when
lifted by one person, and may cause human injury or property damage.
 Do not lift the copier with the paper feed unit installed. The handle and grips may
be damaged.
 The one-tray paper feed unit must be installed on the caster table (D446). Prepare
the caster table first before installing this unit.
1. Remove all tape on the paper feed unit.
2. Remove the paper tray and remove all tapes and padding.
To Next Page
Loading...
Need help?
General
