D023/D025 2-24 SM
2.6.2 INSTALLATION PROCEDURE
Turn off the main switch of the copier and unplug the power cord before you start
the installation procedure.
You need two or more persons to lift the copier. The copier is highly unstable when
lifted by one person, and may cause injury or property damage.
Do not lift the copier with the paper feed unit installed. The handle and grips may
be damaged.
1. Remove all tape on the paper feed unit.
2. Remove the paper trays and remove all tape and padding.
3. Grasp the handle [A] and grips [B] of the machine.
To Next Page
Loading...
