Bit Switches
D393 78 SM
1: Enabled expansion option, the scanner page memory is
extended to 12 MB. But the SAF memory
decreases to 18 MB.
7
Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit a
form or letterhead which has a colored or printed
background, change this bit to “1”. “Original 1” and
“Original 2” can be selected in addition to the “Text”,
“Text/Photo” and “Photo” modes.
System Switch 1A [SP No. 1-101-027]
No. FUNCTION COMMENTS
0-7
LS RX memory remaining
refresh value setting
Sets a value of 4K.
If the amount of memory remaining falls below 4K,
documents received in memory are printed to
create more space in memory.
Initial value: 0x80 (512K)
00-FF (0-1020 KB: Hex)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
System Switch 1D [SP No. 1-101-030]
No FUNCTION COMMENTS
0
RTI/CSI/CPS code display
0: ON
1: OFF
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
1-7
Not used
Do not change these settings.
System Switch 1E [SP No. 1-101-031]
To Next Page
Loading...
