Ricoh D025 - Page 1442

Bit Switches
SM 101 D393
Fax Option
Type C5000
(D393)
(DIS/NSF) before transmission.
1-5
Not used
Do not change the factory settings.
6-7
Available unit of resolution in
which fax messages are
received
Bit 7: 0, Bit 6: 0 = mm
Bit 7: 0, Bit 6: 1 = inch
Bit 7: 1, Bit 6: 0 = mm and inch
(default)
Bit 7: 1, Bit 6: 1 = Not used
For the best performance, do not change the
factory settings.
The setting determined by these bits is informed to
the transmitting terminal in the pre-message
protocol exchange (in the DIS/NSF frames).
Communication Switch 15 – Not used (do not change the settings)
Communication Switch 16 [SP No. 1-104-023]
No FUNCTION COMMENTS
0
Not used
Do not change the factory settings.
1
Optional G3 unit (G3-2)
0: Off
1: On
Change this bit to "1" when installing the first
optional G3 unit (G3-2).
2
Not used
Do not change the factory settings.
3
Optional G3 unit (G3-3)
0: Off
1: On
Change this bit to "1" when installing the second
optional G3 unit (G3-3).
4-7
Not used
Do not change the factory settings.
Communication Switch 17 [SP No. 1-104-024]
No FUNCTION COMMENTS
0 SEP reception 0: Polling transmission to another maker’s