Ricoh D025 - Page 1469

Bit Switches
D393 128 SM
0 1 0 1 12.0 Kbps
0 1 1 0 14.4 Kbps
Modem setting for reception
Sets the modem type for reception. The default is "0100" (V27ter, V29, V17).
Bit 7 Bit 6 Bit 5 Bit 4
0 0 0 1 V27ter
0 0 1 0 V27ter, V29
0 0 1 1
V27ter, V29, V33
(invalid)
0 1 0 0 V27ter, V29, V17
0 1 0 1
V27ter, V29, V17,
V34*
4-7
*V34 is not supported for IP-Fax communication.
IP Fax Switch 07 [SP No. 1-111-008]
No. FUNCTION COMMENTS
0
TSI information
0: Not added, 1: Added
Adds or does not add TSI information to
NSS(S).
1
DCN transmission setting at T1
timeout
0: Not transmitted, 1: Transmitted
Transmits or does not transmit DCN at T1
timeout.
2
Not used
Do not change this setting.
3
Hang up setting at DIS reception
disabled
0: No hang up
1: Hang up after transmitting DCN
Sets whether the machine disconnects after
DIS reception.