Image Creation
SM 4-51 D023/D025
Replacement
&
Adjustment
2. Turn the machine power off.
3. Development unit (p.4-41 "Drum Unit and Development Unit")
4. Hopper cover [A] (4 hooks)
Release the three hooks first in the correct order (from { to }).
Put the head of a screwdriver in the groove gap [B] as shown, and then release
the hook .
Follow the correct order { to . Otherwise, the hopper cover may be
damaged.
The hook breaks easily.
5. Shake a bag of developer and pour it into the development hopper [A].
6. Reattach the hopper cover (hook x 3).
To Next Page
Loading...
