EasyManua.ls Logo

Ricoh D025 - Page 475

Ricoh D025
1522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SC Tables
SM Appendix 3-23 D023/D025
Appendix
Service Call
Conditions
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Paper transfer unit contact error
The paper transfer unit contact sensor does not detect the movement of
actuator at the sensor while the polygon motor rotates.
Defective paper transfer unit contact sensor
Defective paper transfer unit contact motor
Broken +24V fuse on PSU
Defective IOB
452 D
1. Check the connection between the paper transfer unit and PSU.
2. Replace the paper transfer unit contact sensor.
3. Replace the paper transfer unit contact motor.
4. Replace the +24V fuse on the PSU.
5. Replace the IOB.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Separation power pack output error
An interrupt checks the status of the power pack every 20 ms. This SC
is issued if the BICU detects a short in the power pack 10 times at
D(ac).
Damaged insulation on the high-voltage supply cable
Damaged insulation around the high-voltage power supply.
460 D
1. Replace the high-voltage supply cable.
2. Replace the high-voltage power supply unit.
3. Replace the IOB.

Table of Contents

Related product manuals