Ricoh D025 - Page 502

SC Tables
D023/D025 3-50 SM Appendix
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Communication line error
The supplied voltage is not sufficient due to the defective
communication line or defective connection.
Same as -001
-005 -
Consult with the user's local telephone company.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Incorrect dial up connection
-001: Program parameter error
-002: Program execution error
An unexpected error occurs when the modem (Cumin-M) tries to call
the center with a dial up connection.
 Caused by a software bug
651
CTL
C
No action required because this SC does not interfere with operation of
the machine.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
EEPROM error
Retry of EEPROM communication fails three times after the machine
has detected the EEPROM error.
 Caused by noise
669 D
Turn the main power switch off and on.