SC Tables
SM Appendix 3-77 D023/D025
Appendix
Service Call
Conditions
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
•
Defective RAM DIMM
•
Defective SPD ROM on RAM DIMM
•
Defective 12C bus
Replace the RAM DIMM.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
833
CTL
C
Self-diagnostic error 8: Engine I/F ASIC
[0F30]
[0F31]
ASIC (Mandolin) for system control could not be detected. After the
PCI configuration, the device ID for the ASIC could not be checked.
Replace the VBCU
[0F41]
ASIC (Mandolin) for system control could not be detected. After the
PCI configuration, the device ID for the ASIC could not be checked.
Replace the VBCU
[50B1]
Could not initialize or read the bus connection.
Check for loose connections at the mother board.
Replace the mother board
[50B2]
Value of the SSCG register is incorrect.
Check for loose connections at the mother board.
Replace the mother board
Rev. 10/06/2010
To Next Page
Loading...
