System Service Mode
D023/D025 8-26 SM Appendix
1907 [Paper Feed Timing Adj.] DFU
002 Feed Solenoid ON: Plain *ENG
[–10 to 40 / 0 / 2.5 mm/step]
003 Feed Clutch OFF: Plain *ENG
004 Feed Clutch ON: Plain *ENG
005 Inverter Stop Position *ENG
006 Reverse Stop Position *ENG
007 Re-Feed Stop Position *ENG
[–10 to 10 / 0 / 1 mm/step]
008 By-pass Solenoid OFF *ENG
[0 to 40 / 0 / 1 mm/step]
009 By-pass Solenoid Re-ON *ENG
[0 or 1 / 1 / 1]
010 By-pass Feed Clutch ON *ENG
[–10 to 10 / 0 / 1 mm/step]
012 Feed Solenoid ON: Thick *ENG
[–10 to 40 / 0 / 2.5 mm/step]
013 Feed Clutch OFF: Thick *ENG
014 Feed Clutch ON: Thick *ENG
[–10 to 10 / 0 / 1 mm/step]
To Next Page
Loading...
