System Service Mode
SM Appendix 8-107 D023/D025
Appendix
SP Mode
Tables
[Thick 2: Trailing Edge Correction] Thick 2 Paper: Trailing Edge Correction
2573
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2553 and SP2558 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2574.
001 Paper Transfer: 1st Side *ENG
002 Paper Transfer: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
003 Separation DC: 1st Page *ENG
[0 to 400 / 100 / 5%/step]
004 Separation DC: 2nd Page *ENG
[0 to 400 / 100 / 5%/step]
[Thick 2: Switch Timing: Trail. Edge]
2574
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
002 Paper Transfer: 2nd Side *ENG
[0 to 50 / 0 / 2 mm/step]
003 Separation DC: 1st Page *ENG
[0 to 50 / 0 / 2 mm/step]
004 Separation DC: 2nd Page *ENG
[0 to 50 / 0 / 2 mm/step]
To Next Page
Loading...
