System Service Mode
SM Appendix 8-111 D023/D025
Appendix
SP Mode
Tables
[OHP: Trailing Edge Correction]
2624
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer *ENG
[–100 to 0 / 0 / 1 mm/step]
002 Separation DC *ENG
[0 to 50 / 0 / 2 mm/step]
2630 [OHP: Environment Correction]
001 Separation DC *ENG
[1 to 60 / 22 / 1 /step]
002 Paper Transfer: BW *ENG
[1 to 60 / 11 / 1 /step]
003 Paper Transfer: FC *ENG
[1 to 60 / 1 / 1 /step]
[Thick 3: Bias]
2650
Adjusts the DC voltage of the discharge plate for thick paper 3.
001 Separation DC: 1st Page *ENG
002 Separation DC: 2nd Page *ENG
[0 to 4000 / 1000 / 10 –V/step]
[Thick 3: Bias: BW]
2651
Adjusts the current for the paper transfer roller for thick paper 3 in
black-and-white mode.
001 Paper Transfer: 1st Side *ENG
[0 to 250 / 10 / 1 –μA /step]
002 Paper Transfer: 2nd Side *ENG
[0 to 250 / 12 / 1 –μA /step]
To Next Page
Loading...
