Ricoh D025 - Page 717

System Service Mode
SM Appendix 8-121 D023/D025
Appendix
SP Mode
Tables
[Special 1: Switch Timing: Trail. Edge]
2774
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side *ENG
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: FINE: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
2780 [Special 1: Environment Correction]
001 Separation DC: Plain: 1st Side *ENG
[1 to 60 / 26 / 1 /step]
002 Separation DC: Plain: 2nd Side *ENG
[1 to 60 / 32 / 1 /step]
003
Paper Transfer: Plain: BW: 1st
Side
*ENG
004
Paper Transfer: Plain: BW:2nd
Side
*ENG
[1 to 60 / 11 / 1 /step]
005
Paper Transfer: Plain: FC: 1st
Side
*ENG
[1 to 60 / 1 / 1 /step]
006
Paper Transfer: Plain: FC:2nd
Side
*ENG
[1 to 60 / 14 / 1 /step]
007 Separation DC: Plain: 1st Side *ENG
[1 to 60 / 26 / 1 /step]