System Service Mode
SM Appendix 8-179 D023/D025
Appendix
SP Mode
Tables
026 Job End Vb Coefficient *ENG
[0 to 100 / 40 / 1%/step]
027 Job End Length *ENG
[0 to 56 / 12 / 1mm/step]
028 Job End Supply *ENG
[0 to 1 / 0.45 / 0.001
mg/cm
2
/step]
[Blade damage prevention mode]
3517
Adjusts the threshold temperature for preventing the cleaning blade at the
drum unit from being damaged. If the temperature is above this value, the
drum reverses briefly at the end of the job to prevent the blade from flipping
over.
001
Execution Temp.
Threshold
*ENG
[0 to 50/ 40 / 1°C/step]
To Next Page
Loading...
