System Service Mode
D023/D025 8-186 SM Appendix
[LD Power Control: Display]
Plain: 154 mm/sec, Thick 2 & FINE: 77 mm/sec
3651
Displays the LD power adjusted for each environment.
001 Plain: Bk *ENG
002 Plain: M *ENG
003 Plain: C *ENG
004 Plain: Y *ENG
005 Thick 1: Bk *ENG
006 Thick 1: M *ENG
007 Thick 1: C *ENG
008 Thick 1: Y *ENG
009 Thick 2 & FINE: Bk *ENG
010 Thick 2 & FINE: M *ENG
011 Thick 2 & FINE: C *ENG
012 Thick 2 & FINE: Y *ENG
[0 to 200 / 100 / 1 %/step]
[HST Concentration Control: Set]
TD Sensor: Toner Concentration Control Setting
3710
Selects the toner concentration control method by HST memory, which is in the
TD sensor.
001 Control Method: Selection *ENG
[0 or 1 / 1 / - ]
0: Not Use, 1: Use
To Next Page
Loading...
