System Service Mode
D023/D025 8-224 SM Appendix
[A3/DLT Double Count] SSP
5104
Specifies whether the counter is double clicked for A3/DLT size prints.
When you have to change this SP, ask your supervisor.
5104 1 Double Count *CTL
[0 to 2 / 0 / 1 /step]
0: NO (Normal count)
1: YES (Double count)
2: YES except By-pass (Normal count for
unknown size)
5112 [Non-Std. Paper Sel.] Non-Standard Paper Selection
001
Determines whether a non-standard paper size can be input for the universal
cassette trays (Tray 2, and Optional paper tray unit trays 1 and 2)
[0 or 1/ 0 / - ]
0: OFF
1: ON, If “1” is selected, the customer will be able to input a non-standard
paper size using the UP mode.
5113 [Optional Counter Type]
001
Default Optional Counter
Type
*CTL
This program specifies the counter type.
0: None, 1: Key card (RK 3, 4)
2: Key card (down), 3: Prepaid card
4: Coin rack, 5: MF key card
8: Key counter + Vendor
9: Bar-code Printer
002
External Optional
Counter Type
*CTL
This program specifies the external
counter type.
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
To Next Page
Loading...
