System Service Mode
D023/D025 8-226 SM Appendix
5128 [Code Mode With Key/Card Option]
*CTL -
001
DFU
5131 [Paper Size Type Selection]
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
001
The program selects a paper size system from the following alternatives: the
AB system (0), the LT system (1), and the AF system (2).
5150 [By-Pass Length Setting]
*CTL
[0: OFF/ 1: ON]
001
Determines whether the transfer sheet from the by-pass tray is used or not.
Normally the paper length for sub scanning paper from the by-pass tray is
limited to 600 mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
*CTL
[0: Soft Key Set/ 1: Hard Key Set]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
5167
Enables or disables the automatic print out without an accounting device. This
SP is used when the receiving fax is accounted by an external accounting
device.
001
Fax Printing Mode at
Optional Counter Off
*CTL
[0 or 1 / 0 / - ]
0: Automatic printing
1: No automatic printing
To Next Page
Loading...
