System Service Mode
SM Appendix 8-235 D023/D025
Appendix
SP Mode
Tables
004 Cancellation Time *CTL
Determines the length of time that the
system waits for correct input of the user ID
and password after a lockout has occurred.
This setting is used only if SP5413-3 is set
to "1" (on).
[1 to 999/60/1 min.]
5414
[Access Mitigation]
001 Mitigation On/Off *CTL
Switches on/off masking of continuously
used IDs and passwords that are identical.
[0 to 1/0/1]
0: Off
1: On
002 Mitigation Time *CTL
Sets the length of time for excluding
continuous access for identical user IDs
and passwords.
[0 to 60/15/1 min.]
5415
[Password Attack]
001 Permissible Number *CTL
Sets the number of attempts to attack the
system with random passwords to gain
illegal access to the system.
[0 to 100/30/1 attempt]
002 Detect Time *CTL
Sets the time limit to stop a password
attack once such an attack has been
detected.
[1 to 10/5/1 sec.]
To Next Page
Loading...
