Ricoh D025 - Page 845

System Service Mode
SM Appendix 8-249 D023/D025
Appendix
SP Mode
Tables
5816 [Remote Service]
*CTL
-
I/F Setting
001
Selects the remote service setting.
[0 to 2 / 2 / 1 /step]
0: Remote service off
1: CSS remote service on
2: @Remote service on
CE Call
002
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to “2”.
Function Flag
003
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
0: Disabled
1: Enabled
Device Information Call Display Setting
006
Displays or does not display the device information call content.
[0 to 1 / 0 / 1 /step]
0: Not displayed
1: Displayed
SSL Disable
007
Uses or does not use the RCG certification by SSL when calling the RCG.
[0 to 1 / 0 / 1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification